ad flags convex

Our ad flags convex are feather-shaped promotional flags designed to attract attention in outdoor advertising, retail promotions, events, and roadside applications. The convex profile refers to the convex-shaped bottom edge of the flag, giving the graphic a distinctive feather-like appearance while providing a large, highly visible branding area.
The pole combines a flexible fiberglass top section with modular aluminum tubes. The fiberglass section works much like a fishing rod: it is thicker at the bottom and gradually tapers toward the top, providing excellent flexibility and allowing the flag to move naturally in the wind. Below the fiberglass section, the aluminum tubes use a plug-in connection system. When multiple aluminum sections are used, they gradually increase in diameter from top to bottom. Cast-aluminum female sockets are pre-installed and securely anchored inside the lower tubes, allowing the upper aluminum tube or fiberglass rod to insert directly into the socket for quick assembly.
Five pole sizes are available for different visibility and application requirements:
Model Pole Height Flag Size
S 6.6ft / 200cm 1.6 × 5ft / 50 × 150cm
M 9.2ft / 280cm 1.8 × 6.6ft / 55 × 200cm
L 11.2ft / 340cm 2 × 8.5ft / 60 × 260cm
XL 14.9ft / 455cm 2.6 × 11.2ft / 80 × 340cm
XXL 18.4ft / 560cm 2.8 × 14.8ft / 85 × 450cm
The bottom of the system is a replaceable base, with seven options available: ground spike 60, ground spike 60 with bearing rotation, cross base tube 60×80 with basic rotation, cross base steel 40×60 with basic rotation, cross base steel 60×80 with basic rotation, cross base steel 40×60 with bearing rotation, and cross base steel 60×80 with bearing rotation.
Base selection should match the installation surface, pole height, and expected wind conditions. In general, the taller the pole and the stronger the wind, the larger and heavier the base should be. For applications requiring additional stability, a water tank can be added to increase the ballast weight.
The flag graphics are produced by direct digital dye-sublimation printing on lightweight flag fabric, typically around 110g. The printed fabric creates a flowing feather-shaped graphic that works particularly well for flags for business advertising, outdoor promotions, and high-traffic locations.
Both single-sided and double-sided graphics are available. A single-sided flag uses one layer of printed flag fabric. A double-sided flag consists of two fabric layers with a black fabric layer sandwiched between them. This construction helps prevent the artwork on the front from showing through to the reverse side, providing cleaner and more independent graphics on both sides.
With customizable graphics, multiple pole heights, flexible fiberglass construction, and a choice of seven bases, these outdoor business flags can be configured for storefronts, shopping centers, sporting events, exhibitions, parking lots, promotional campaigns, and roadside advertising. They are practical wind flags for advertising when high visibility and movement are important.